Copyright © 2016 Alarm.com
|
www.alarm.com
|
December 2016
2
Indoor/Outdoor Mini Bullet Camera ADC-VC725
|
Setup Guide
TROUBLESHOOTING
If you have issues connecting the camera to the account, power cycle the camera and try again.
If issues persist, reset the camera to factory defaults by using the Reset button located under the camera cover.
•
Disconnect the camera from the power supply.
•
Unscrew and remove the camera cover, being careful not to damage the connecting wires.
•
Using a pen or small screwdriver, press and hold the Reset button while reconnecting power. You should hear
a slight “click” when the Reset button is pressed. Continue to hold the Reset button for 10 seconds.
QUESTIONS?
Visit: www.alarm.com/supportcenter
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
