4
ADC-V821 Installation Guide
ADC-V821 Installation Guide
5
Troubleshooting
• If you have issues connecting the camera to the account,
power cycle the camera and try again.
• If issues persist, try resetting the camera to factory
defaults by using the Reset button (located under the
camera cover).
- Ensure the camera is connected to a power supply.
- Unscrew and remove the camera cover, being careful
to not damage the connecting wires.
- Press and hold the Reset button for 6 seconds or until
the IR LEDs flash red.
Dome Cover
Reset Button
Bottom Case
Light Sensor
Tilt Stopper Screw
Gimbal
RJ-45 Cable
DC Power Cable
IR LEDs
Lens