ALAN Electronics HP 68 L Скачать руководство пользователя страница 5

5

English

Squelch

The squelch can be opened momentarily by a short press on 

MON

If 

MON 

is kept pressed for more than 3 secs the squelch remains 

open continuously. To close the squelch, press 

MON 

shortly once 

again.

Key lock

To avoid changing the settings of the radio unintentionally you can 

lock all the keys with the exception of the 

PTT 

and the volume 

knob.
To lock or unlock the radio press and hold pressed 

FUNC

 and press 

thereafter 

. The key symbol (

) on the display indicates that 

the radio is locked.

Backlighting

The display is automatically backlit for 2 secs whenever a key is 

pressed.

2

  A press on the 

PTT 

wont turn on the backlighting.

Display

Character segment

PL

  CTCSS activated

1

 

CTCSS tone 100–192 Hz

2

 

CTCSS tone 203–250 Hz

H

 

High transmit power

VOX

  Indicates voice operated 

transmitting

  Indicates radio lock

Sc

 

Scanning

Charging the battery

You charge the battery with the supplied desktop charger which is 

connected to 230 Volt main current via the AC adapter. Connect the 

cable of the AC adapter on the back of the desktop charger. The 

battery is then inserted in the back of the charger. The charger can 

be used to charge a radio with battery or just a battery.
The radio should be turned off during charging. Allow, if possible, 

the battery to fully discharge before recharging it. The battery will 

be fully charged after approx. 12 hours. You should then remove the 

battery from the charger.
To ensure that the battery works well it’s important that you correctly 

charge and discharge it.
The red light diode of the charger should glow when charging.

2

  Check that the connectors on the back of the battery are touch-

ing the connectors of the charger.

2

  A new battery doesn’t reach its maximum capacity until it has 

been charged/discharged 3–4 times.

I

 The battery charger is for indoor use only.

I

 If the battery isn’t charged for some time it looses capacity 

through self-discharge, up to 25% in one week. Therefore always 

charge the battery at least once a month.

I

 Don’t overcharge the battery. Interrupt the charging after 12 

hours.

Содержание HP 68 L











Отзывы: