Alamo JD-5105, Инструкция по сборке

Страница: 19 / 104

© 2005
Alamo Group Inc.
Section 2 - 5
Switch Blade (JD- 5105-5205- 5225 - 5325 - 5425 - 5525, Asy. Man) 05/05
WARNING!
Wear personal protective equipment when assembling the mower. As a minimum that
should include:
Q
Safety Glasses
Q
Safety Shoes
Q
Gloves
Q
Hard Hat
Q
Hearing Protection
Q
Welding Helmet
WARNING!
Before attempting to assemble ensure that the tractor engine is off and the tractor
transmission is in the park position with the parking brake engaged.
Q
Remove the engine key and keep it in your pocket to prevent inadvertent
starting or movement of the tractor.
Q
Place wheel blocks in front and behind the tractor wheels to prevent the tractor
from moving.
Q
Never attempt to start the tractor unless properly seated in the tractor seat
with the seat belt fastened around you.
Q
Never attempt to operate the tractor and mower controls unless seated in
the tractor seat with the seat belt fastened around you.
WARNING!
Securely block up and support the tractor before attempting to loosen and move the
tires. Failure to properly block up the tractor can result in the tractor to suddenly move
or fall, crushing you or another worker.
Q
Never work under any raised component or any component that is not
securely blocked up or supported.
WARNING!
Many components of this mower are very heavy and must be handled by proper
material handling equipment. Do not lift components that weight over 50lbs by
yourself.
Q
Use an overhead crane, forklift, or other coworkers to lift heavy items. Ensure
lifted components are securely supported.
Q
Never walk or work under a lifted component.
WARNING!
Use extreme care when moving, handling or adjusting the tractor tires. The tires are
extremely heavy and could fall and crush you
Q
Use an overhead crane or forklift to move the tires.
Q
Properly fasten the tires to the material handling equipment to prevent the tire
from falling.
WARNING!
The hydraulic oil is under high pressure and a hydrauli leak can cause oil to be injected
under the skin.
Q
Before starting the tractor ensure all hydraulic connections have bee tightened
Q
Never check for leaks with your hands. Use a piece of wood or cardboard to
check for the leak making sure your hands and face are kept away from the
leak area.
Q
Repair any leaks before operating the equipments
Q
Clean up all oil that has leaked according to the requirements of the oil supplier.
Oil residue on the ground can result in unjury from slipping or falling.
General Information / Installation Requirements