Alamo FC-0001 Скачать руководство пользователя страница 150

OPERATION

MAVERICK   3/09

Operation Section 3-52

© 2009 Alamo Group Inc.

OPERA

T

ION

Reduce speed before turning or applying the brakes.
Ensure that both brake pedals are locked together
when operating on public roads.

   OPS-U- 0023

10.2 Hauling the Tractor and Implement

Before transporting a loaded tractor and implement,
measure the height and width dimensions and gross
weight of the complete loaded unit.  Ensure that the
load will be in compliance with the legal limits set for
the areas that will be traveled through. 

OPS-U- 0024

 

U s e   a d e q u a t e l y   s i z e d   a n d   r a t e d   t r a i l e r s   a n d
equipment to transport the tractor and implement.
Consult an authorized dealer to determine the proper
equipment required.  Using adequately sized chains,
heavy duty straps, cables and/or binders, securely tie
down both the front and rear of the tractor utilizing the
proper tie  down locations as specified by the tractor
manufacturer.

 OPS-U- 0025

Содержание FC-0001



















































































































































































Отзывы: