manualshive.com logo in svg

Alamo Bush Hog HDE-4 Series, Руководство оператора

Поделиться
Скачать
Alamo Bush Hog HDE-4 Series Скачать руководство пользователя страница 71

MAINTENANCE

MAINTENANCE

ZTR  04/20

Maintenance Section 6-3

© 2020 Alamo Group Inc.

Mower Model ....Engine Series
Number

HDE2249FS4...........Kawasaki FS651
HDE2255FS4...........Kawasaki FS651
HDE2261FS4...........Kawasaki FS651
HDE2049KT4...........Kohler KT715
HDE2555KP4 ..........Kohler KT745

HDE2561KP4 ..........Kohler KT745

Locate your Mower Model Number and then go to the
Engine Manufacturer’s website and navigate to the man-
ual needed. Follow links listed below, listing the engine
series when prompted.

KAWASAKI ENGINES:
www.kawaskienginesusa.com

go to Parts and Support tab

go to Manuals in dropdown

go to Series and choose FS Series

choose either the FS651V Manual  
Manual from dropdown.

KOHLER ENGINES
www.kohlerengines.com/manuals

go to Manuals and Maintenance

go to Owners & Service Manuals

enter  engine model number under I know my model

number (KT715 or KT745)

Under Manuals select Owners

Select Language (English)   

Checking Engine Oil Level

NOTE: Check oil level when engine is cold.

Engine oil should be checked before each use or daily.

Follow the procedures for checking oil as instructed by

the engine manufacturers manual which applies to your

Zero Turn Mower.

Changing the Engine Oil and Oil Filter

NOTE: It is recommended after the first 8 hours of
usage the oil and filter be changed.

Follow the procedures for changing oil  and oil filter as
instructed by the engine manufacturers manual which ap-
plies to your Zero Turn Mower. 

The engine manufacturers manual will provide the rec-
ommended service intervals, oils, amount required and
filters required when changing oil.

Dispose of the used oil at a recycling cen-
ter.

Servicing the Air Cleaner

Service Intervals:

Every 250 hours replace the primary Air Filter (more often
in dusty or sandy conditions).

Check the Safety Filter every 250 hours and replace
every 500 hours of usage.

Follow the procedures for changing air filter as instructed
by the engine manufacturers manual which applies to

your engine. 

Содержание Bush Hog HDE-4 Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды