Address:800 S Wineville Avenue, Ontario, CA 91761,USA
Website:www.aladdin-e.com
Email: [email protected]
3
2.Operation
B1924-05
The microscope is housed in a molded styrofoam container. First take the
container out of the carton, and keep the container on its side. Open the container
carefully and don’t let the optical items drop down, avoiding them being damaged.
Check carefully to ensure the arm and accessories are well.
Install the objective into the nosepiece from the lowest magnification to the
highest, in a clockwise direction from the rear. Insert the eyepiece into the eyepiece
tube.
2-1 Set the specimen slide
Place a specimen to be studied on a glass slide, and fix it by the slide-holders of
the mechanical stage.
If we use the movable specimen holder, fix the specimen by slide-holder of the
movable specimen holder. Adjust its position by the switch of the movable specimen
holder.
2-2 Set illumination
Insert the delivery end of standard voltage transformer into the back jack in
the basement. Then insert the voltage transformer to the power supply, and turn on
the power to light the view-field. The brightness could be adjusted by turn the rotary
switch.
The power could be also supplied by the built-in chargeable battery. Both the
battery power supply and the external power supply are auto switchover, so the
battery would supply the power when the voltage transformer is power off, and the
power supply would auto shift to the voltage transformer when it resupply the
power.
2-3 Adjust Focusing
Shift 4X objective into the optical-way, and adjust the coarse-focus-knob when
observing till the image outline is presented. Then lock the limit-stop-screw to avoid
impact damage between the objective and slide. Adjust the fine-focusing-knob to get
the image clear.
Turning the condenser to shift the objective into the light path, and observing. Adjust
