1. Use as External USB HDD
1.1 Insert Hard Disk
9
Use 2.5” IDE Hard Disk for Laptop(or Notebook) PC.
9
Hard Disk should be “Master”. However, if the Hard Disk supports “Single” mode, you need to try to set
“Single “mode.
② Pull the PCB out.
③ Grip HDD and insert it into
the pins of PCB (be sure to
match the 44 pins)
① Grip the hasp and pull back
the front panel, and then open
the top cover.
④ Screw HDD on PCB by using
the supplied screws.
⑤ Insert the PCB into the case,
and then close the top cover
and front panel.
6
Содержание Portable MPEG Player
Страница 1: ......
