AL Tech MG-25P, Руководство пользователя

Страница: 34 / 34

33
2.5” HDD MULTIMEDIA JUKIBOX
Portable MPEG4 Player
Appendix. Non High-Speed USB Hub Message
The message will be displayed On windows XP when you plug the Mpeg4 Player into USB 1.1
spec. Host adapter.
Appendix. Check when new local disk drive not be created.
1) Check HDD’s jumper is master.
2) Check to match the pin socket of the Mpeg4 Player with the pins of HDD.
3) Check to format the HDD. Refer to Appendix. How to format Hard Disk.
4) Check the driver installation on your windows system. If the driver displays “! or ?”, delete the
driver and re-install it.
5) Connect the supplied power adapter. If you connected the Mpeg4 Player to side USB port or
no power USB hub, use the supplied power adapter or connect the Mpeg4 Player to rear USB
Port of PC and power USB hub.
6) In Case of using a USB Hub, you had better use the USB hub with external power.
7) USB connect cable’s length is recommended up to max 3M.
Appendix. How to upgrade a new firmware
If you want to get a new firmware, contact to the seller.
Save the upgrade file into Mpeg4 Player -> Connect the Mpeg4 Player to TV or a monitor -> Select
[Video] -> Select the upgrade file -> press [Enter] button then the upgrade is applying automatically.
After doing upgrade, turn off and on the Mpeg4 Player.
In order to check the firmware version, press [Setup] -> see [Other Setup] then you can see the
current firmware version.