21
1) After connecting MG-450HD and plug power cable,
Windows itself will install driver automatically. And then,
check the driver installation at Windows [Start > Settings >
Control panel > (switch to classic View on Windows XP) >
system > Hardware > Device manager > Universal Serial
Bus controllers > USB Mass Storage Device ].
2) Check ‘My Computer’ or ‘Explorer’, there should be a new
volume. You can copy any data to this volume.
3) After copying data, remove MG-450HD with using
remove icon at Windows right-down corner. If you
don’t follow this procedure, data and MG-450HD may have
damage.
1.3.3 Windows 2000, XP
9
If new volume is not be appeared, check HDD format or not.
W and HDD file system. Windows 2000, XP detect both FAT32
and NTFS file system.
9
When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when you plug
MG-450HD into USB 1.1 spec. Host adapter.
Содержание Mediagate MG-450HD
