AL Tech Mediagate MG-45, Руководство пользователя

Страница: 31 / 53

3.2 Basic Setup
3.2.1 Video Setup
This is
a
guide for setting
up the
video output of MG-45. You have to setup MG-45’s video output mode
to the
same as
the
TV
set's video
input mode.
9 When you cannot see
video on
screen after connecting video cable, check following,
1. “TV “– Switch to Video Input Mode: Turn on
the
TV, and switch
it
to
a
video input mode
which is the the
same as
the
MG-45's video connection.See the TV Set's user
manual.
2. “MG-45” – Switch to Video Output Mode: Press
the
[VIDEO] button repeatedly.
Each time you
press [VIDEO],
the video output signal is
changed.
When Pressing [VIDEO] leave a 2-3 second pause between each press
.
3. After you see
video on
screen, you
need
to save
the
video configuration of
the
MG-45
- Go To SETUP>Video Output.
TV Video
Input Mode
MG-45 Video
Output Mode
Connection Jack
of TV, MG-45
Video Cable Type
TV Out: NTSC C/S-Video
(HD Component OFF)
Normal Video
TV Out: PAL C/S-Video
(HD Component OFF)
CVBS or Composite Jack
(
Usually the
Yellow Jack)
Yellow RCA Cable
(Supplied)
TV Out: NTSC C/S-Video
(HD Component OFF)
S-Video
TV Out: PAL C/S-Video
(HD Component OFF)
S-Video Jack
S-Video Cable
* Black rounded
TV Out: NTSC C/YPbPr
(HD Component OFF)
Component 480i
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480p HD Component Out On 480p
Component 720p HD Component Out On 720p
Component 1080i HD Component Out On 1080i
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
Component Cable
* Y(Green), Pb(Blue), Pr(Red)
9
NTSC, PAL
= The Video output standard
. Select
the correct one that needs to be used in your Country.
30