GB
22
PW 1850
Operation
6.3
Water supply
IMPORTANT! Danger of damage to the ap-
pliance.
Drawing in dirty, rusty or muddy water
will cause damage to the appliance.
■
Operate and clean the appliance only with
clean water.
■
Ensure that there are no corrosion additives,
fertilisers, plant protection products and
cleaning agents in the water.
6.3.1
Hanging suction hose in open vessel
(06)
The high-pressure cleaner can be operated with
water from open vessels, such as rain barrels or
buckets. Water can also be taken from ponds,
rivers, lakes, etc.
NOTE The priming time is increased of
the maximum suction head is exceeded.
■
Observe the maximum suction head for the
appliance.
Requirements:
■
The suction hose is connected to the appli-
ance.
■
The suction filter is connected to the suction
hose.
1. Hang suction hose (06/1) with suction filter
(06/2) in the open vessel (06/3). The suction
filter must be immersed in the water.
2. Attach hose clip (06/4) to the edge of the ves-
sel.
6.3.2
Connecting suction hose to water tap
(07)
Precondition:
The water tap must have a hose fit-
ting.
1. Remove the suction filter from the quick-cou-
pler.
2. Push suction hose with quick-coupler (07/1)
onto hose fitting (07/2) of the water tap.
3. Turn on the tap.
6.4
Detergent bottle
Pour a liquid cleaning agent for pretreating the
surface to be cleaned into the detergent bottle.
Regulate the amount of cleaning agent added to
the water jet using the rotary knob. After pretreat-
ment, you can rinse the surface with clean water.
Precondition:
The suction hose must be connect-
ed to a water supply.
6.4.1
Filling the detergent bottle (08)
1. Remove attachment (08/1) from detergent
bottle (08/2).
2. Pour liquid cleaning agent into the detergent
bottle. The cleaning agent must be suitable
for the intended cleaning application.
3. Screw the attachment firmly onto the deter-
gent bottle again.
6.4.2
Attaching detergent bottle to
appliance (09)
1. Turn detergent bottle (09/1) until the two lugs
(09/2) are upright.
2. Push (09/a) detergent bottle with attachment
completely into handle (09/3).
3. Turn the inserted detergent bottle through
90° (09/b) until it locks.
7
OPERATION
WARNING! Danger if assembly is not
carried out completely!
Use of an incompletely
assembled appliance can result in serious injury.
■
Only use the device when it is fully assem-
bled!
■
Insert the battery into the appliance only
when it has been fully assembled!
■
Check that the multi-spray nozzle and/or de-
tergent bottle have been fitted correctly be-
fore switching on!
IMPORTANT! Danger from water.
Contact
with water will lead to short circuits and destruc-
tion of the battery.
■
Do not expose the battery to water and mois-
ture when using the appliance.
■
Keep the battery dry when changing the
multi-spray nozzle and detergent bottle.
■
Pull the protective silicone sheath over the
battery.
7.1
Adjusting the multi-spray nozzle (10‑ 13)
CAUTION! Risk of injury.
Do not adjust the
nozzle setting during operation.
■
Stop the appliance and then change the noz-
zle setting.
The multi spray nozzle (10) has five different
spray patterns. Select a suitable nozzle function
for your application.
