AL-KO PS 2035, Оригинальное руководство пользователя

Страница: 26 / 280

GB
26 PS 2035
Safety instructions
3.1.5 Power tool use and care
■
Do not force the power tool. Use the cor-
rect power tool for your application.
The
correct power tool will do the job better and
safer at the rate for which it was designed.
■
Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
■
Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools.
Such preventive safety mea-
sures reduce the risk of starting the power
tool accidentally.
■
Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these instruc-
tions to operate the power tool.
Power
tools are dangerous in the hands of untrained
users.
■
Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use.
Many accidents are caused by
poorly maintained power tools.
■
Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are eas-
ier to control.
■
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
3.1.6 Battery tool use and care
■
Recharge only with the charger specified
by the manufacturer.
A charter that is suit-
able for one type of battery pack may create
a risk of fire when used with another battery
pack.
■
Use power tools only with specifically
designated battery packs.
Use of any other
battery packs may create a risk of injury and
fire.
■
When battery pack is not in use, keep it
away from other metal objects, lie paper-
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
■
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected form the
battery may cause irritation or burns.
3.1.7 Service
■
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts.
This will ensure that the
safety of the power tool is maintained.
3.1.8 Safety information regarding the
rechargeable battery
This section mentions all the basic safety instruc-
tions to be heeded when using the rechargeable
battery. Read these instructions.
■
Remove the rechargeable battery from the
power tool before starting any work on the
power tool (e.g. maintenance, tool change),
before transport and before storage.
■
Only use the rechargeable battery as desig-
nated, i.e. for AL-KO rechargeable battery-
driven appliances. Only charge the recharge-
able battery with the AL-KO charging unit
provided.
■
Only unpack the new rechargeable battery
from the original packaging when it is to be
used.
■
Fully charge the rechargeable battery before
using it for the first time and always use the
specified charging unit. Comply with the de-
tails given in these instructions for use for
charging the rechargeable battery.
■
Do not use the rechargeable battery in envi-
ronments where there is a potential risk of
explosion and/or fire.
■
Do not expose the rechargeable battery to
moisture and humidity when in use with the
appliance.
■
Protect the rechargeable battery from heat,
oil and fire to prevent it being damaged so no
vapours and electrolyte liquids can escape.
There is a danger of explosion!
■
Do not subject the rechargeable battery to
impacts or throw it.