AL-KO JET stream M, Руководство пользователя

Страница: 22 / 52

22
English

Release and remove the suction head.

Clean the electrodes.

Insert and lock the suction head.

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note:
In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.

Check cables, plugs, fuse, socket and
electrodes.

Turn on the appliance.

Empty the container.

Turn off the appliance and wait for 5
seconds, turn it on again after 5 sec-
onds.

Clean the electrodes as well as the
space between the electrodes.

Remove blockages in the suction noz-
zle, suction tube, suction hose, or flat
pleated filter.

Replace the paper filter bag or the dust
disposal bag (special attachment).

Ensure the filter cover properly locks
into place.

Clean or replace the membrane filter
(special accessory).

Replace the flat pleated filter.

Check for proper installation of the flat
pleated filter.

Replace the flat pleated filter.

Clean the electrodes as well as the
space between the electrodes.

Continuously check the filling level in
case of non-conductive liquid.

Suction hose is not connected.

Inform Customer Service

Inform Customer Service
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
Suction turbine turns off
Suction turbine does not start again
after the container has been emp-
tied
Suction capacity decreases
Dust comes out while vacuuming
Automatic shut-off (wet vacuum
cleaning) does not react
Automatic filter cleaning is not
working
Automatic filter cleaning cannot be
switched off
Automatic filter cleaning cannot be
switched on
Warranty