AL-KO GTLi 18V, Руководство по эксплуатации

Страница: 18 / 172

en
Startup
18 GTLi 18V
5. Let the lawn trimmer run at idling speed for a
few moments. This causes the cutting line to
be cut off to the correct length.
6. The appliance switches off when the switch is
released.
ADVICE
After the appliance has been switched
off, the spool head continues to rotate for
a few seconds.
OPERATION
Switch on the appliance before approaching
the grass to be cut.
Angle the appliance forwards slightly, and
walk forwards slowly (9).
Sweep the appliance to the right and left in
order to cut the grass (9).
Long grass must be cut in several passes. Always
proceed from top (10-1, 10-2) to bottom.
ADVICE
Tap the spool head on the ground from
time to time when working. The automa-
tic tip function always keeps the line at
optimum length.
Use the plant protection car in order to hold
the appliance at the correct distance from
obstacles (11-1).
Do not overload the appliance during work.
Make sure the motor is stopped before you
remove any cuttings.
CAUTION!
The vibration value during use of the
electrical implement may differ from the
indicated value, depending on what the
appliance is used for.
If the battery lawn trimmer is overloaded in
very long grass, the line will be blocked. Im-
mediately remove the appliance from the long
grass and reduce the load. Otherwise, the
motor could be permanently damaged.
After use, remove the battery and check the app-
liance for damage.
MAINTENANCE AND CARE
CAUTION!
Remove the battery before starting any
work on the appliance.
After use, remove the battery and check the
machine for damage.
Electrical malfunctions are only allowed to be
rectified by authorised specialist workshops.
Never use the appliance if the blade of the
line cutter is missing or damaged.
Always keep the guard, string head and en-
gine free of mowing debris.
Do not spray the machine with water! Pene-
trating water can lead to malfunctions.
Do not get the appliance wet or expose it to
moisture.
Regularly check the appliance is in good
working order.
Do not use any cleaning agents or solvents.
They can cause irreparable damage to the
appliance.
Changing the spool
(Replacement spool GT Li 18V art. no. 112969)
1. Press the two locking catches to open the co-
ver (8-1).
2. Remove the empty spool (8-2).
3. Insert the new spool.
4. Make sure that the spring is re-inserted (8-3).
5. Guide the line outwards on both sides.
6. Put on the cover and engage the locking cat-
ches.
STORAGE
Clean the appliance and its accessories after
each use.
Keep the appliance out of reach of children
and unauthorised persons.
ADVICE
Hang up the lawn trimmer by its handle.
This avoids placing unnecessary load on
the cutter head.
Storing the battery and charger
Store the battery in a dry place protected from
frost, with an ambient temperature between 0
°C and +35 °C, and with the battery charged
to approx. 40 - 60%
Completely recharge the battery for about 2
hours after 6 months in storage
Do not store the battery near metallic or acid-
containing objects - these present a risk of
short-circuit!