AL-KO G&S Chassis Caravan, Гарантийная и сервисная книжка

Страница: 24 / 36

Maintenance
After the First Inspection - Routine Service Schedule
Following the first inspection, chassis and suspensions must be properly inspected, serviced and
maintained at regular intervals. Service intervals are generally 12 months or 10,000 km whichever occurs
first. Service intervals for “off-road” use and/or for use in extreme conditions are reduced to 6 months or
5,000 km, whichever occurs first
NOTE
“Off-road” use means use on rough roads, unmade roads, and rugged terrain. Also includes use in hot,
dusty, flooded, corrosive or muddy conditions.
Component
Type of use
Work required
Normal road use “Off-road” use
*Wheel nuts
Each use or weekly if
being used for periods
exceeding 1 week
Each use
Check tightness using a quality tension
(torque) wrench to 135 Nm. See
instructions below for further details.
Suspension
mounting
bolts
Every 12 months or
10,000 km Every 6 months
or 5,000 km
Tighten the bolts then loosen the bolts
slightly so that the springs and shackles
are free to move
Control arm
mounting
bolts
Every 12 months or
10,000 km Every 6 months
or 5,000 km
Check operation and adjustment of service
brakes and parking brake. Adjust as
required.
* Brake wiring
Every 12 months or
10,000 km
Every 6 months
or 5,000 km
(each use if
being used over
rugged terrain)
Check wires between chassis and brake
backing plates to ensure there are no
breaks or loose connections.
Warranty and Service Hand book
25
GandS GS Warranty Book AAC 2019.indd 24 22/10/2019 12:55:39 PM