AL-KO BMP 14000, Инструкция по эксплуатации

Страница: 19 / 136

Product description
477347_ c 19
Fluids that are hotter than 35 °C
Water containing sand and abrasive fluids.
Scope of supply
The garden pump is supplied ready-to-use, with
filter, sleeve, and operating instruc tions.
TRANSPORT
Transport the engine only when the fuel tank
is empty.
Always transport the engine with the spark
plug upwards, otherwise the following may
occur:
➯
Generation of smoke
➯
Starting difficulties
➯
Soot on spark plug
CHECKS BEFORE OPERATION
WARNING!
Always perform a visual check prior to
start-up. Do not operate the machine if
the operating and/or fastening parts are
loose, damaged, or worn.
Check the general state of the engine
Check the exterior and underside of the en-
gine for indications of an oil or petrol leak.
Indications of damage
All nuts and bolts must be tight.
All guards and covers are fitted.
Fuel level
Engine oil level
Air filter insert
ASSEMBLY
Setting up the equipment
1. Prepare a flat and firm location.
2. Erect the unit horizontally and safe from the
risk of flooding.
➯
The unit must be protected from the rain
and direct water jets.
Connecting the suction line (fig. 6)
1. Select the length of the suction line in such a
way that the pump cannot run dry. The suction
line must always be at least 30 cm beneath
the surface of the water.
2. Connect the suction line (6). In doing so, make
sure that the connection is tight, but do not
damage the thread.
➯
We recommend using flexible lines at the
pump inlet (6). This ensures that mecha-
nical pressure or tension cannot be ex-
erted on the pump.
3. Always lay the suction line with an upward
gradient.
Fitting the pressure line (fig. 5)
1. Fit the pressure line. In doing so, make sure
that the connection is tight, but do not damage
the thread.
2. Open all shut-off devices (valves, spray nozz-
les, water cock) in the pressure line.
FILLING WITH FUEL
Safety
WARNING!
Danger of fire!
Petrol is highly inflamma-
ble!
Use only appropriate containers to store pe-
trol.
Refuel outdoors only
Do not smoke when refuelling
Do not open the tank cap when the engine is
running or hot.
Renew the tank or tank cap if damaged.
Always close the tank lid firmly
If petrol has leaked out:
Do not start the engine
Avoid start attempts
Clean the machine
CAUTION!
Fill with oil before starting up.
Filling with oil
1. Unscrew the oil dipstick (8), and insert the fil-
ling aid.
2. Fill with oil.
3. Remove the oil filling nozzle, and screw the
oil dipstick (8) back in.