Subject to changes in line with technical progress!
11
3426558
Safety instructions
2.2
Specific safety instructions
2.2.1 Warnings for cleaning work
WARNING
Risk of injury due to collisions, cutting, pinching and crushing.
There is a risk of injury to hands and arms during cleaning work.
Work carefully at all times.
Wear your PPE (cut-proof gloves, safety goggles, safety shoes).
WARNING
Health hazards due to contact with media.
There is a risk of health hazards during cleaning work due to skin contact with microbially
contaminated impurities and liquids and inhalation of vapours.
Minimise the risk of contamination by observing the maintenance intervals.
Use food-safe and paint-compatible disinfectants and cleaning agents.
Test the paint compatibility on an inconspicuous area of the housing surface.
Use only approved containers.
Ensure an adequate supply of fresh air.
Wear your PPE (cut-proof gloves, goggles, breathing mask).
Observe the hazardous substances regulations for the cleaning agents used.
2.2.2 Training
The owner/operator of the
AL-KO
AIR
SAFE
®
1200 / 1600
air purifier must brief his personnel on the following subjects
at regular intervals:
Compliance with the installation instructions and the operating manual and the statutory regulations.
Intended used of the device.
Observance of all company, operating and work instructions at the owner’s/operator's setup location.
Response to faults.
2.2.3 Intended use
The
AL-KO
AIR
SAFE
®
1200 / 1600
air purifier is intended exclusively for the sterilisation of atmospheric air in heavily
frequented rooms. The device reduces the risk of infection by lowering the dust content, aerosol concentrations and
other contaminants in the air.
The
AL-KO
AIR
SAFE
®
1200
air purifier is intended for rooms from 20 to 140 m
2
.
The
AL-KO
AIR
SAFE
®
1600
air purifier is intended for rooms from 30 to 180 m
2
.
The devices may only be used for room air sterilisation in large, heavily frequented rooms, such as:
Classrooms in schools
Day care centres
Restaurants
Conference rooms
Shops
The devices are suitable for operation in the temperature range from -20°C to +40°C. Deviating fields of application must
be agreed upon with the manufacturer.