442103_a
19
Installation and start-up
as necessary and restrict the duration of the work
to a minimum. For your personal protection and
protection of persons in the vicinity, appropriate
hearing protection must be worn.
4
INSTALLATION AND START-UP
4.1
Attaching the carrying belt to the basic
appliance
See "Multitool MT 36 Li – basic appliance" oper-
ating instructions.
4.2
Putting the attachment on the basic
appliance
See "Multitool MT 36 Li – basic appliance" oper-
ating instructions.
5
OPERATION
CAUTION!
Danger of burns
The gearbox housing becomes hot dur-
ing operation.
■
Do not touch the gearbox housing.
5.1
Turning the cutter head (02, 03)
The cutter head can be adjusted stepwise
between -90° and +45° (02). This means it can
be adjusted as required for the work (03/a, 03/b).
WARNING!
Danger of cutting injuries
Danger of cutting injuries when reaching
into the cutting blade.
■
Always switch off the appliance be-
fore turning the cutter head.
1. Press and hold the unlock button (02/1).
2. Turn the cutter head (02/2) until it engages in
the required position.
3. Release the unlocking button (02/1).
5.2
Pulling off the protective cover (04)
1. Before switching on the appliance, pull the
protective cover (04/1) off the cutting blade
(04/2).
5.3
Switching the appliance on and off
See "Multitool MT 36 Li – basic appliance" oper-
ating instructions.
5.4
Oiling the cutting blade (05)
WARNING!
Danger of cutting injuries
Danger of cutting injuries when reaching
into the cutting blade.
■
Always switch off the appliance be-
fore oiling the cutting blade.
While working, perform the following tasks at reg-
ular intervals:
1. Oil the cutting blade (05/1) with environment-
ally friendly lubricating oil (05/2).
This enables the cutting blade to run more easily,
it does not become hot and the battery life in-
creases.
6
WORKING BEHAVIOUR AND
WORKING TECHNIQUE (06)
WARNING!
Increased risk of falling
There is a greater risk of falling if work is
carried out from an elevated position
(e.g. ladder).
■
always work with the appliance from
the ground and make sure that you
are standing securely.
■
Heed the safety instructions.
■
Cut the hedge regularly and only at the per-
mitted times.
■
Only cut off the thin branches and new
growth on the surface of the hedge; do not
cut too deep.
■
Always cut the two sides of a hedge first, fol-
lowed by the top. This prevents cut material
from falling into areas that you have not yet
trimmed.
■
Hedges should always be trimmed into a
trapezoidal shape (tapering toward the top).
This prevents the leaves on the lower
branches from being shaded out (06).
Содержание 113374
