Midi case - manual
p. 2
PC case
Safety Precautions
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet. Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the computer, abstain from touching electrical outlets, wires and
electonic circuits. The user’s contact with electronic components should be kept to a minimum.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
ź
Before assembling the computer, take into account the manuals for all components to be
placed inside the case.
ź
Keep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
ź
It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping
or crushing may cause its damage.
ź
The product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
ź
If the product has been damaged and does not work properly, safe operation of the device is
not possible. It is essential to stop using the product and to protect it against re-use for security
purposes.
ź
Wear gloves to prevent accidents when installing components.
ź
Do not use excessive force during assembly it may result in the damage of the case.
ź
Incorrect connection of cables and wires may cause fire due to short circuit.
ź
In case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
ź
Do not block the ventilation holes.
ź
Do not put your hands or other objects into the case while the computer is working. There is a
risk of hand injury or equipment damage.
ź
Keep the case closed and the side panels properly secured with screws while the computer is
in operation.
ź
Power cord (not included) should be laid in such a way as to eliminate the risk of stumbling or
hooking over.
ź
All maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
ź
Product and power cord should not be touched with moist or wet hands under no
circumstances.
The assembly should be carried out by persons with appropriate technical knowledge of PC
construction.
