AK-L1-150 - user manual
p. 4
LED Power Supply
Cleaning the power supply:
ź
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
Disconect the power supply from the electrical socket and connected devices before cleaning.
1.
Prepare the 3-wire power cable. WARNING! Make sure that the cables are not live.
4.
Turn on the power.
3.
Screw the cables: phase conductor (brown) to L connector, neutral conductor (blue) to
N connector, protective conductor (yellow-green) to FG / .
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
Connecting the Power Supply to energy grid:
Product manufacturer:
Akyga Europe sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
Maximum power:
Voltage adjustment:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection) :
OCP (over current protection) :
OPP (overpower protection) :
OTP (over temperaturre protection) :
SCP (short circuit protection) :
Power supply connector:
Output connector:
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code :
AK-L1-150
110-265V , 50/60Hz
12V / 12.5A
150W
11-15 V
80%
5-50ºC
-40/+80ºC
Yes
Yes
Yes
Yes
Yes
Screw
Screw
IP20
CE, FCC, RoHS
YES
5901720135018
5. Output connector from the power
supply (COM).
9. LED diode indicating that the power
supply is on.
2. Neutral conductor connector (N).
3. Protective conductor connector ( ).
6. Output connector from the power
supply (-V).
7. Output connector from the power
supply (+V).
4. Output connector from the power
supply (COM).
1. Phase conductor connector (L).
8. Potentiometer for changing the output
voltage (+V ADJ).
1
2
3
4
5
6
7
8
9
