•
The angle brackets are tightened loosely at the corners. Then one by one the screws at
each corner are tightened firmly. It is important to begin with the inner screws. After this the
angle brackets are all to be tightend firmly.
•
Wooden frame:
the frame parts are assembled with angle brackets that are to be tightend
firmly. Then screw the angle brackets to the bottom plates, position the frame parts and
screw them to the bottom plates, but not quite 100% firm yet.
•
Dowels and angle brackets are placed in the hed- and foodend frame parts. These parts
are positioned on the bed and fasted to the long side parts of the frame. Finally tighten all
screws firmly.
