Akuvox IT82 Series, Руководство администратора

Страница: 25 / 72

16
IT82X
Admin Guide

Press Save in the top right corner to save the modification.
2.6.2. Disarm Code
Go to Arming - Disarm Code to enter the disarm code settings
interface. Users can modify the disarm code here.
 Enter the original disarm code
①
first, and it is 0000 as
default.
 Enter the new disarm code
②.
 Enter the new disarm code again
③
for confirming.

Press Save to save the modification.
2.6.3. Alarm Log
Go to Arming - Alarm Log to enter the alarm log interface. Users
can check the alarm log, including “location,” “zone,” “zone type”
and “alarm time.”
 Hold an alarm log
①
, and it will show up delete prompt.
Figure 2.6.2 Disarm code
Figure 2.6.3 Alarm log