55
IT82X
Admin Guide
Location:
To select which location the detection device is in,
including “Bedroom,” “Guest room,” “Hall,” “Window,” “Balcony,”
“Kitchen,” “Study” and “Bathroom.”
Type:
To select which type of detection device is, including
“Infrared,” “Drmagnet,” “Smoke,” “Gas” and “Urgency.”
Trigger Mode:
To setup triggering mode for the sensor, including
NO (normal open) and NC (normal closed).
Alarm Status:
To setup status of alarm sensor, including enable,
disable and 24H.
Note:
Disable status of detector means it cannot be triggered, 24H
status means it cannot be disabled. Enable status means it
depends on arming mode.
4.4.2. Motion Detector
Users could choose to display
Motion Detector
on the home/more
page, please refer to chapter 3.4.10.2. IT82X Monitor could receive
the captured motion pictures from the door phone, which requires
the configurations on door phone.
Figure 4.4.2 Motion detection
Содержание IT82 Series
Страница 1: ...1 IT82 Series Indoor Monitor Admin Guide ...
