E16 Door Phone Administrator Guide
66
Parameter Set-up:
•
Mode
: select either
Disabled
Mode or
Wrist
Mode for temperature measurement
according to your need. The device can be installed with a digital forehead
temperature detector therefore you can are required to set the mode properly
according to your application.
•
Mask Detection:
select
Disable
if you want to turn off the mask detection. Select
Set
mask-wearing as mandatory
and the device will check if the visitor is wearing a
mask or not while reminding the visitor with the announcement
Please wear a mask
.
Select
Display mask-wearing prompt
and the device will display the mask-wearing
prompt only without making the mask-wearing mandatory. A warning alarm will be
triggered when the body temperature measured is detected higher than the defined
normal body temperature.
•
Normal Body Temperature
: set the body temperature to the predefined body
temperature as the measuring basis in either Fahrenheit or Celsius. For example, if
you set the temperature at 37.3 degrees celsius as the normal temperature, then any
body temperature measured higher than 37.3 degrees celsius will be deemed as an
abnormal temperature, while the temperature is lower than 34 degrees celsius will be
deemed as low body temperature.
•
Low Temperature
: set the low temperature.
•
Action For Abnormal Body Temperature:
if you select
Access Denied
then anyone
who is detected with abnormal body temperature will be denied the door access. If
Содержание E16 Series
Страница 1: ......
Страница 85: ...www akuvox com E16 Door Phone Administrator Guide 81 ...
Страница 109: ...E16 Door Phone Administrator Guide www akuvox com 105 ...
