- 5 -
Preparation
Install Display on solid horizontal surface such as a table or desk.
For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault
and unsafe situations, please do not place any objects on top of the set.
This apparatus can be used in tropical and/or moderate climates.
Installation Of The TFT TV To The Wall (optional)
1-
To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).
Unscrew the 3 screws (M4 x 6) that attach the foot assembly to the TFT panel and remove the
foot assembly from the TFT panel.
2-
Place the 4 Plastic stepped spacers "smaller diameter towards the TV" in the holes and
attach with (6 x 23mm) screws.
Brick Wall
1-
Decide where you want to place the
Tv.
Fix the stencil to the wall and level
using a spirit level or other tool.
2-
Mark the mounting holes carefully,
a n d d r i l l t h e h o l e s w i t h a s m a l l
masonary pilot drill.
3-
Now drill the correct size holes for
the wall plugs.
4-
Place the frame to the wall and fix with
8 4 x 30mm screws.
5-
Place the Tv onto the frame and ensure it
is fixed firmly.
Note Do NOT walk away from
the TV until you are sure it is held firmly.
Composite walls
Because the support uprights in the composite wall will not be aligned with the holes in the
mounting frame, it is wise to seek professional help. Do NOT rely on Plastic wall plugs.
Akura do NOT accept responsibility for damage caused to person or property by poorly
fitted wall mountings.
FIGURE 1
FOOT ASSEMBLY
SCREW HOLES
FOR PLASTIC PINS
TFT PANEL
ENG-37700W-1062UK-37 INCH 17MB15 OEM-(WO VGA-WO PIP)(HD READY)-50092400.p65
06.09.2006, 15:48
5
