- 12 -
• When ”
” button is pressed while in teletext mode,
the screen will be splitted into two windows, one
displaying the teletext and the other displaying the
current channel. Press the “
” button or
“
TV
DTV
”
button to exit from teletext.
• To exit text press “
”.
Note:
If the signal becomes insufficient, the teletext
mode will be quitted.
Fastext
Your TV supports the 500 page Teletext system. When
the page number of any of the 500 pages in memory
is entered, the system will not search for the re-
quested page; instead it will display the page auto-
matically. If the requested page is not in memory, the
system will search for the requested page number
and save the 500 pages including the requested page
into memory after finding it.
• Press the
button to move the Teletext screen
forward one page at a time.
• Press the
button to move the Teletext screen
backward one page at a time.
For Fastext
The subject-heading for the information may have a
particular colour.
• Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant page
quickly.
TOP text
TOP text mode of operation will be activated automati-
cally according to the transmission.
• If TOP text transmission is present, colour coded
buttons will appear in status row.
• If TOP text transmission is not present, status row
will not appear.
The subject-heading for information may be located in
colored box.
In Top mode the
“-P/CH”
or
“P/CH+”
commands will
request the next or previous page respectively. If
TOP text transmission is not available, in case of op-
eration of these commands, wraparound occurs. For
example page 100 appears to be one greater than
page 199.
Connect Peripheral Equipment
High Definition
Your LCD Television is capable of displaying High
Definition pictures from devices such as a High Defi-
nition Satellite Receiver or DVD Player. These devices
must be connected via the HDMI socket or Compo-
nent Socket. These sockets can accept either 720p
or 1080i signals.
Note:
When it is desired to watch HDMI source with a
DVI to HDMI cable; in order to enable audio, Audio
Input (which is located at the left side of the antenna
input) is to be used to get DVI device’s audio signals.
Via The Scart
The TV has 2 Scart sockets. If you want to connect
peripherals (e.g. video, decoder, etc.) which have
Scart sockets to the TV, you can use SCART socket
of the TV.
Note:
If an external device is connected via the Scart
sockets, the TV will automatically switch to AV mode.
If both sockets are employed at the sime time, SCART
1 becomes the preferential.
Via Aerial Input
If the device you want to connect does not have a
Scart socket, you should connect it to the Aerial input
of the TV.
If the VCR is connected via Aerial input, it is
suggested to use Programme 0.
Decoder
If you are subscribed to cable TV offers, the
organisation will supply you a corresponding decoder
unit to allow the programmes to be unscrambled.
For further information consult your dealer.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket
to the TV
• Connect the decoder to the EXTERNAL socket of
TV with a RCA cable. Through the SCART/RCA
socket of the decoder, you may attain a better dis-
play resolution.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a Scart cable to
SCART
sockets.
ENG-32720W-1063UK-32 INCH 17MB22-(WO PIP-WO PC)-50108619.P65
27.06.2007, 12:05
12