Akura ATL1510W-ID, Инструкция по эксплуатации

Страница: 11 / 31

Analog
PC
V
V
( )
1.Connect the T to the PC using a 15pin VGA lead (not supplied) and Audio to the PC audio
socket
2.Press the TV/AV button to display the source menu, use the CH+/- buttons to select PC and
press CURSOR RIGHT button to confirm. The T will now display the signals from the PC.
You may need to adjust the PC to the TV. See page 13
TV
AV
DVB
SCART
PC
Channel
Move Select Exit
Auto Tune
Manual Tune
Fine Tune
Skip
Sound
.
SYS
Channel Swap
Off
I
1.Connect the Power adaptor to the DC input socket and the Aerial lead to the TV Tuner input.
2.To turn ON, press the “Power Button”.
3.Press the
TV/AV button on the TV or Remote Control, the source menu
will display on the screen
(
see picture right
)
. Use the CH+/- buttons to select
the source, press CURSOR RIGHT button to confirm.
4.Press the MENU button on the TV or the MENU button on the remote control,
the screen will display the OSD menu, press the CH+/- button to select the
third menu Channel (see picture below)press the CURSOR RIGHT button to
enter the menu, press CH+/- buttons to select the item“Auto Tune”.
Press the CURSOR RIGHT button, the TV will start to search from the lowest frequency
upwards. When a station is found it will be stored automatically in the “First” location, further
received stations will be stored in order. When Auto Tune is completed the TV will display the
first station received. In most cases the stations stored will not be in Channel Order i.e. BBC1
will not be in Location “1”. To move the stations into the correct locations you will need to use
“Channel Swap” see page 12.
Note when Auto Tune starts, to stop it press MENU , otherwise leave to complete the search.
DVB operation
(
see page 14
)