Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Instructions for use:
1.) Overview control element:
2.) Preparation and installation of the filters
The air purifier is equipped with a coarse dust filter (G4) and a HEPA filter (H13) from the factory. To install new
filters, first open the filter compartment door by opening the locking buckles. Now remove the coarse dust filter and
the HEPA filter. Then insert the new filters neatly back into your air purifier. When inserting the HEPA filter, make
sure that it is inserted the right way round. (The marking arrow on the filter indicates the direction of the airflow.)
Finally, close the filter compartment door again properly using the locking buckles.
Reset button
Filter change indicator
(for HEPA/coarse dust filter)
Stepless rotary control
for setting the
operating strength
Maximum operating
strength (MAX)
Lowest operating
strength (MIN)
