www.tmatlantic.com
2
SAFETY PRECAUTIONS
These instruments fulfill the regulations of CE-LVD (EN-61010:2001)
and CE-EMC (EN-55022:1998/+A1:2000; EN 55024:1998; EN61000-3-
2:2000; EN61000-3-3:1995)
To ensure safe operation of the equipment and eliminate the danger
of serious injury due to short-circuit (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions are
exempt from any legal claims whatever.
•
Prior to connection of the equipment to the mains outlet, check
that the available mains voltage corresponds to the voltage setting
of the equipment.
•
Connect the mains plug of the equipment only to a mains outlet
with earth connection.
•
Do not place the equipment on damp or wet surfaces.
•
Do not subject the equipment to direct sunlight or extreme
temperatures.
•
Do not subject the equipment to extreme humidity or dampness
•
Replace a defective fuse only with a fuse of the original rating.
Never short circuit fuse or fuse housing
•
Do not exceed the maximum permissible input rating.
•
Conduct measuring works only in dry clothing and in rubber shoes,
i.e. on isolating mats.
•
Comply with the warning labels and other info on the equipment.
•
Do not insert metal objects into the equipment by way of the
ventilation slots
•
Do not place water-filled containers on the equipment (danger of
short-circuit in case of knock over of the container)
•
Do not operate the equipment near strong magnetic fields (motors,
transformer etc.)
•
Do not subject the equipment to shocks or strong vibrations
•
Keep hot soldering iron or guns away from the equipment
•
Allow the equipment to stabilize at room temperature before
taking up measurement (important for exact measurement)
•
Do not modify the equipment in any way
