www.tmatlantic.com
4
Operation
1.
On the front of the housing you will find the LC-Display, the
+/
- button, and the ON /OFF switch.
2.
After the power plug and the soldering iron have been
plugged in and the soldering iron has been placed in the
stand, turn on the soldering station with the ON /OFF
switch.
3.
For the first use, in the display, you will see 330°C in the
lower line as factory default and 25°C in the upper line.
4.
With the mulfunction display, temperatures from 150°C to
450°C can easily be set and confirm.
5.
With the
+/
- button, you can set the temperature with
a resolution of rc. To do so, briefly press the respective
button. If you hold the button, the display will change in
steps of 10°C. When the desired temperature is reached,
just release the button.
6.
After you have set the desired temperature, “HEAT ON” and
“WAIT” will be displayed.
7.
For second use, the station will memory the temperature set
for the last use.
8.
Select the right temperature for every job to avoid cold
soldering joints or damaging delicate components or
burning flux with excessive heat. Burnt flux will cause weak
joints.
Technical Data
Rated Voltage: 110-130V/60HZ; 220-240V/50HZ
Operating Voltage: 24V
Nominated Power: 48W
Fuse: Micro Fuse 1A/250V (5X20mm)
Soldering Tip temperature: 150-450°C
Display Precision: 5%
Station Dimension: 120x104x137mm
Weight: 1400g
