SAM
™
SMART NOZZLE N
2
P
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
PHONE: 800.228.1161
www.akronbrass.com
Sheet: 128570
Revision 06/28/2022
Page: 3 of 34
•
Weight less Akron Brass nozzle: 2.4 lbs (1.1 kg) with batteries
•
Environmental Conditions:
o
Operating Temperature: -20 °C (-4 °F) to 60 °C (140 °F)
.
o
Storage Temperature: -10 °C (14 °F) to 30 °C (86 °F) Batteries; -20 °C (-4 °F) to 60 °C (140
°F)
SAM™ SMART NOZZLE
o
Power management: Automatic shutdown and sleep mode
o
Ingress protection: IP67 equivalent
4.
WHAT’S INCLUDED
•
SAM™ SMART NOZZLE (customer specified, Turbojet™, Assault™, etc. at required operating
pressure)
•
Four batteries-Tenergy 750 mAh Li-ion rechargeable RCR123A (hereby referenced as Akron Brass
P/N 803435)
•
Battery charger P/N 60470010
5. OVERVIEW
The
SAM™ SMART NOZZLE module is an integrated unit mounted to the inlet of Akron Brass Company
handline nozzles. The nozzles which the
SAM™ SMART NOZZLE module can be mounted to include the
Turbojet™, Assault™, and Pyrolite shutoffs. The specified operating pressure can be 50, 75, or 100 psi
depending on the nozzle and customer requirements. The
SAM™ SMART NOZZLE module and customer
specified nozzle come completely assembled, ready to use with the properly configured
SAM™ SMART
NOZZLE system in the truck. The
SAM™ SMART NOZZLE system in the truck requires the 60370025
transmitter/receiver to communicate with the SAM™ system in the truck. When properly configured, the
SAM™ system will support up to two (2) separate nozzles equipped with the SAM™ SMART NOZZLE
module at the same time.
Customer Specified
Nozzle inlet
Function Buttons
(one each side)
Battery Compartment
LED Display
Customer Specified
Akron Brass Company
Handline Nozzle
SAM
™ Module with Nozzle
Serial Number Location
