Akrobat STORMER PLUS, Инструкция по установке и эксплуатации

Страница: 3 / 9

4 5
INSTALLATION AND USER MANUAL - STORMER PLUS
2. TRAMPOLINE PARTS
Stormer 10ft
(305 cm)
Stormer 12ft
(366 cm)
Stormer 14ft
(427 cm)
Stormer
480 cm
Part A
Frame part without
sockets
4 pcs 4 pcs 4 pcs 5 pcs
Part B Frame part with sockets 4 pcs 4 pcs 4 pcs 5 pcs
Part C Leg extension 8 pcs 8 pcs 8 pcs 10 pcs
Part D
Trampoline leg 4 pcs 4 pcs 4 pcs 5 pcs
Part E
Junction part 8 pcs 8 pcs 8 pcs 10 pcs
Part F
Jumping mat 1 pc 1 pc 1 pc 1 pc
Part G Springs 64 pcs 80 pcs 96 pcs 104 pcs
Part H
Frame pad 1 pc 1 pc 1 pc 1 pc
Part I Frame pad elastics 16 pcs 16 pcs 16 pcs 20 pcs
Part J Ladder 1 pcs 1 pcs 1 pcs 1 pcs
Safety net assembly parts
Part K Poles for safety net 7 pcs 7 pcs 7 pcs 9 pcs
Part L Safety net 1 pc 1 pc 1 pc 1 pc
Part M Fiberglass Rods 8 pcs 8 pcs 8 pcs 10 pcs
Part N
Caps for safety net 8 pcs 8 pcs 8 pcs 10 pcs
3. ASSEMBLY AND INSTALLATION
We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points and
sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.
The parts are made for assembly without screwing with a simple AkroClick system.
The frame of your trampoline is now assembled
and you can place it on the desired location.
Continue by joining the frame legs with the
frame parts – start with the frame part with
T-socket (as shown on the image). Make sure
the free part of the junction part is turned
to the outside of the frame circle. Continue
assembling the frame, alternating the frame
parts with and without sockets to form a circle.
Assembling the frame
Place the trampoline frame (Parts C, D and
E) flat on the ground. This way you will have a
better overview.
Place the leg extensions on the trampoline legs
(Part C into Part D).
Next, add the junction part to the leg extension
(Part D and Part E). The part with closed
bottom is the part where the safety net poles
will be set.
1
2
3
Important:
The trampoline legs could sometimes
be slightly tight to fit – it is intended
this way to serve as additional strength
for the trampoline.