7
O W N E R ’ S M A N U A L
Inflate floor next to 1.0 PSI. Unscrew the top of the Boston valve, inset pump hose and
inflate the floor. DO NOT OVER INFLATE. When complete, screw top of Boston valve
back on.
Look over the KAYAK to make sure it appears straight. The bladders can occasionally
twist in casing so the bladders may need to be deflated slightly to correct how the
bladders are positioned. Access points on the kayak are available so if needed, you
can adjust bladders. If repositioning of bladders was needed and complete, inflate
the side tubes first then the floor.
NOTE:
A S S E M B L Y I N S T R U C T I O N S
Place seat(s) in kayak cockpit. The seat will connect to the floor with Velcro and
tensioning straps with clips for adjustability. Position the seat(s) so that the weight
of the paddler(s) will balance the kayak. If assembling a double, the heavier paddler
should be in the back of kayak.
4
5
