Technical specifications
Power supply ...........................................................................................................................................85 - 264 V ~ / 47 - 63 Hz
Maximum consumption .......................................................................................................................................................10 VA
Communications: ..............................................................................................................................WIFI (802.11 b/g/n, 2.4 GHz)
...................................................................................................................................Ethernet Port 10/100 Mbps
........................................................................................................................................................RS 485 9600
...............................................................................................Quad-band GSM/GPRS (850/900/1800/1900 MHz)
Relays...................................................................................................................8 relay outputs SPST, 30 Vac/Vdc, 1 A, cos
j
=1
Antenna ..........................................................................................................................................................................External
Working ambient temperature........................................................................................................................................0 to 40 ºC
Range of moisture permitted ..........................................................................................................................................5 - 95 %
Maximum working height .................................................................................................................................................2000 m
Casing...........................................................................................................................Self-extinguishing UL94 V0 polycarbonate
Protection degree..................................................................................................................................................................IP20
Fixing.....................................................................................................................................................................DIN rail 46277
2
Connections ..........................................................................................................................Plug-in terminals, maximum 1.5 mm
Electrical and safety features .........................................................................................Double insulation (fitted), protection class II
Dimensions (with terminals and antenna fitted).....................................................................105 mm (W) x 135 mm (H) x 50 mm (D )
Simplified declaration of conformity
AKO Electromecánica S.A.L. hereby declares that the radioelectric device types
AKO-5041
(Akonet.Edge) conform to the provisions
set forth by Directive 2014/53/EU.
The full text of the EU conformity declaration is available at the following internet address:
http://help.ako.com/manuales/declaracion-ue-de-conformidad
Start-up
2.-Access the “Edges” (A) section and click “+” (Activate new Edge) (B).
3.-Enter the data that appears on the label of the new AKONet.Edge (Serial no. and validation code) or click
and scan the QR
code provided on the label.
4.-Finish the activation by filling in the requested data.
5.-After registering start searching for devices connected to the AKO Edge and activate them.
6.-From then on, the AKO Edge starts to transmit data to
. For further information, please refer to the manuals available
on our website.
Display and analysis of the logged data
Both the display of the logged data and the device configuration must be done in the
The portal also allows you to analyse the stored data using graphs, statistics and operating indicators. For more information visit
Wiring
Always disconnect the power supply to do the wiring.
For disconnection, the power supply circuit must be equipped with at least a 2 A, 230 V switch, located near the
device. The power supply cable shall be of the H05VV-F or NYM 1x16/3 type. The section to be used will depend on current
local regulations but should never be less than 1.5 mm . The 120 / 230 V~ wiring area must be kept clear of any other
2
external element.
Add device
1
2
A
B
3
4
5
Tr+
Tr+
GND
GND
Tr-
Tr-
Tr-
Tr-
Tr-
Tr-
Tr+
Tr+
Tr+
Tr+
Gnd
Gnd
Gnd
Gnd
AKOGAS
AKOGAS
AKOGAS
AKOGAS
Terminating resistors are not required.
RS485
(MODBUS)
85 - 264 V~
/ 47 - 63 Hz
V1
V2
V3
N
Tr-
Tr+
Gnd
C1
C2
C3
C4
R1
R2
R3
R4
C8
C7
C6
C5
R8
R7
R6
R5
