AKO AKO-5012, Быстрое руководство

Страница: 13 / 36

5012H001 Ed.05
13
Converter configuration
AKO-80039
Maximum of one converter per web server
The AKO-80039 converter included comes pre-installed out of the box to operate without needing additional
configuration. However, if the software does not detect any device, check the converter indicators:
Ÿ
The red and green indicators are flashing: Standard operation
Ÿ
Only the red indicator is flashing: Check the installation between the devices and the converter and
their configuration.
Ÿ
No indicator is flashing: Check the configuration on the AKO-5012 web server.
Configuration
-Access the administration / general configuration menu
-Select the device and press “ Edit ”.
-Check whether there are other ports available. If
so, select another port, press “ Accept ” and
repeat the search for devices checking that both
indicators are flashing.
AKO-80080
Maximum of 10 converters per web server
The AKO-80080 converter (not included) requires a specific configuration on the AKO-5012 web server.
Configuration
-Access the administration / general configuration menu
-Press “ New ”.
-Name the installation.
-Change the installation type to “ Ethernet ” and
enter the IP address assigned to the converter
(see the converter manual). The “ RTU mode ”
must be disabled and the “ Read Timeout ”
must be 500.
-Press “ Accept ”
English