[AKD7756-HF]
<KM101400>
2010/06
- 11 -
With GUI, it is possible to make adjustment of 8 CRAM parameters simultaneously in RUN state.
Figure 8. Control S/W [Mon/Slider] tab screen
(1) Select [Mon/Slider] tab.
(2) Push down the [USE] button to write this operation setting to the DSP.
First, write the address to [ADDR].
Without using the slid bar, it is also possible to input the value to [VAL].
Set the range of the slide bar to [MAX] and [MIN]. (Usually 7FFF ~ 0000)
(3) This function is enabled only when CODEC and DSP buttons are pushed down. (CODEC and DSP are in RUN
state)
(2)
(3)
(1)
