![AKM AKD4648-C Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/akm/akd4648-c/akd4648-c_manual_2886277002.webp)
[AKD4648-C]
<KM088701>
2007/04
- 2 -
Evaluation Board Manual
Operation sequence
(1) Set up the power supply lines.
(1-1) In case of using the regulator.
(1-1-1) TVDD is supplied from the regulator.
Set up the jumper pins.
JP22 JP23
JP
REG_SEL TVDD_SEL
State REG
Short
Set up the power supply lines.
[VCC] (red) = 4.3 ~ 5.0V : typ. 4.5V for regulator and HVDD of AK4648
(regulator 3.3V output : AVDD, DVDD and TVDD of the AK4648 and logic)
[TVDD] (orange) = Open
[AGND] (black) = 0V : for analog ground
[DGND] (black) = 0V : for logic ground
(1-1-2) TVDD is supplied from the power supply connector of “TVDD”.
Set up the jumper pins.
JP22 JP23
JP
REG_SEL TVDD_SEL
State REG
Open
Set up the power supply lines.
[VCC] (red) = 4.3 ~ 5.0V : typ. 4.5V for regulator and HVDD of AK4648
(regulator 3.3V output : AVDD and DVDD of the AK4648 and logic)
[TVDD] (orange) = 1.6 ~ 3.6V : typ. 3.3V for TVDD of AK4648 (TVDD
≤
DVDD)
[AGND] (black) = 0V : for analog ground
[DGND] (black) = 0V : for logic ground
(1-2) When the regulator is not used.
Set up the jumper pins.
JP22 JP23
JP
REG_SEL TVDD_SEL
State VCC
Open
Set up the power supply lines.
[VCC] (red) = 2.6 ~ 3.6V : typ. 3.3V for AVDD, DVDD and HVDD of AK4648 and logic
[TVDD] (orange) = 1.6 ~ 3.6V : typ. 3.3V for TVDD of AK4648 (TVDD
≤
DVDD)
[AGND] (black) = 0V : for analog ground
[DGND] (black) = 0V : for logic ground
* Each supply line should be distributed from the power supply unit.
(2) Set up the evaluation mode, jumper pins and DIP switches.
(See the followings.)
(3) Power on.
The AK4648 and AK4115 should be reset once bringing SW1 (PDN) “L” upon power-up.