[AKD4558-A]
<KM116602>
2015/04
Control Software Manual
■
Evaluation Board and Control Soft Settings
1. Set an evaluation board properly.
2. Connect a PC (IBM-AT compatible) and an evaluation board via a USB cable.
The evaluation board recognized as HID (Human Interface Device) on the PC.
It is not necessary to install a new driver.
3. Start up the control program.
When the screen does not display “AKUSBIF-B” at bottom left, reconnect the PC and the USB control box, and
push the [Port Reset] button.
4. Proceed evaluation by following the process below.
[Support OS]
Windows XP / Vista / 7 (32bit) (XP compatible mode is recommended for Vista / 7)
64bit OS’s are not supported.
Figure 3. Control software window
- 15 -