AkitikA STEREO 400, Быстрый старт

Страница: 4 / 11

Page 4 of 11
About Components
We reserve the right to make design and/or component changes at any time without prior
notification.
Recommended Solder
The kit must be assembled with 63/37 (tin/lead) Rosin Core solder
1
. The recommended
diameter is 0.031 inches. Kester p/n 24-6337-8800 solder is a very good choice.
Warranty
With the exception of fuses, Akitika will replace for free any component of a correctly
assembled PC-30 replacement that fails within one year of the date of purchase when it
has been used in home stereo applications. It is the responsibility of the kit builder to
install the replacement part(s). This warranty applies to the original purchaser only. It
does not apply to units that have been physically or electrically abused, modified without
prior factory authorization, or assembled with other than 63/37 Rosin Core solder.
Akitika LLC’s liability shall in no event exceed the cost paid to Akitika LLC for the kit.
1
https://en.wikibooks.org/wiki/Practical_Electronics/Soldering has entries for both 60/40 and 63/37 solder
blends. This reference calls out a preference for 63/37 because it is a eutectic solder, which it says is less
prone to cold solder joints.