akira PTV-50H08, Руководство по обслуживанию, Страница: 9 / 67

-
9
-
Model No.: PTV-50H08
Version: 1.0
MAINTENANCE ADJUSTMENT
Adjustment Methods
1 How to enter the “M” status: with the MENU key pressed, press keys MUTE and TXT on the
remote controller successively
How to leave the “M” status: press the channel plus key on the front panel.
2 How to enter the aging status: At the “M” status, press Key Recall on the remote controller to enter
the aging status; now the “M” sign shows red.
How to leave the aging status: press Key Recall on the remote controller for more than two seconds
to leave the aging status; now the “M” sign shows green again.
3 How to enter the status of a bright line: At the “M” status, press Key Still on the remote controller to
enter the status of a bright line, and press Key Still on the remote controller once more to leave the
status of a bright line.
4 How to enter the status of geometry linearity adjustment: In the TV mode, with Key SK01 pressed,
press Key MUTE on the remote controller to enter the status of geometry linearity adjustment; press
Key SK01 to leave the status of geometry linearity adjustment.
5 How to enter the status of under convergence adjustment: Turn on the TV set with Key SK01
pressed to enter the status of under convergence adjustment, now the three-color squares displayed
on the screen. Press SK01 or Key CONV on the side panel to exit.
6 How to enter the status of convergence adjustment:
Method One: In the TV mode, press SK01 to enter the status of convergence adjustment.
Method Two: In the TV mode, press Key CONV on the side panel together with Key TV/AV on the
remote controller to enter the status of convergence adjustment.
Press Key SK01 or CONV to exit.
7 How to select the color in the status of convergence adjustment: In the status of convergence
adjustment, press Key picture on the remote controller to switch between colors. The switching
order is: Single green (adjust the green), red + green (adjust the red) and red + blue + green (adjust
the blue); press Key Audio to select the display color.
8 How to select the mode of convergence adjustment: In the status of convergence adjustment, press
Key TXT on the remote controller to select between Modes 13X16 and 5X5.
9 How to move the cursor during the convergence adjustment: Press digital Keys 2 , 4 , 5 , 6 and 8 ,
and the cursor moves as follows:
Digital Key 2-------- cursor up
Digital Key 8--------cursor down
Digital Key 4--------cursor left
Digital Key 6--------cursor right
Digital Key 5--------cursor back to the original center