akira LCT-17CHST, Руководство по обслуживанию

Страница: 26 / 37

-
26
-
Model No.: LCT17CHST.doc
Version: 1.0
FACTORY MODE
The Parameter adjustment of factory mode introduction:
The method of Entering into factory mode: turn down the volume to 0,
press down the key of “mute” in remote control, then press the key of “menu” in
remote control. press CH+ and CH- choose the items which need to adjust.
The method of exiting from factory mode: press the
in remote control,
after exiting from the factory mode, you should turn on the TV again.
Now the introduction of the modes which are often used is below, the others
are design parameter mode, not permit to modify .
M6
Quick access key for “ Language “
IFPL Adjust the scale of picture and sound in the IF signal
TOP Tune AGC voltage
M13
Quick access key for “DVD”
DVD Switch for DVD source
DPF Switch for DPF source
M17
LOGO ON / OFF for LOGO display
BLUEBLACK Blue screen switch
M24
AUTO AUTO revise
M25
Quick access key for “Title”
INIT Initialization program
M28
Quick access key for “Open”
IIC BUS OPEN OPEN bus