akira CT-29FD9CPT, Руководство по обслуживанию

Страница: 8 / 54

Model No: CT-29FD9CP
T
Version 1.0
8
2-3-2 CIRCUMFERENCE CONVERGENCE ADJUSTMENTS
NOTE: This adjustment requires Rubber Wedge Kit.
1. Loosen the clamping screw of deflection yoke to allow the yoke to tiIt.
2. Place a wedge as shown in figure (2) temporarily.
(Do not remove cover paper on adhesive part of the wedge.)
3. Tilt the front of the deflection yoke up or down to obtain better convergence in
circumference (See figure 4) Push the mounted wedges into the space between
picture tube arid the yoke to hold the yoke temporarily.
4. Place other wedge into bottom space arid remove the cover paper to stick.
5. Tilt the front of the yoke right or left to obtain better convergence in circumference
(See figure 4.)
6. Hold the yoke position arid put another wedge in upper space, remove cover paper
and stick the wedges, recheck overall convergence.
7. Detach the temporarily mounted wedge and put it in another upper space. Stick 2 on
picture tube to fix the yoke.
8. After placing three wedges, recheck overall convergence. Tighten the screw firmly to
hold the yoke tightly in place.
9. Stick 3 adhesive tapes on wedges as shown in figure 2.