19
Model No.: AC-S10HGX2
Version: 1.0
Disassemble right side plate
Screw off the surrounding
bolts of the right side
plate, and take off the
right side plate.
Disassemble axial flow fan
Screw off the nuts of fan
blade by spanner and
could take off the fan
blade
Disassemble the outdoor motor
Screw off 4 pcs tapping
screw which fixing the
motor and pull out the
motor lead wire
connection insert and
disassemble the motor.
To screw off 2 pcs
tapping screw from the
motor support and lift it
upward, disassemble the
motor support.
Disassemble 4-way valve
(Only for cooling and
heating unit) Unsolder 8
pcs solder joint of two pcs
4-way valve, then remove
the connection wire of
4-way valve wire loop
and take off the 4-way
valve.
Bolt
Nuts
Motor
Motor fixing
screw
Motor
support
Fixing screw
Middle
isolation sheet
Cable-cross
hole
Motor wire
4-way
valve
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
