05
6. How to Use
M1
ON/OFF:
Press
POWER for
1 Second
HOT
M2
TEMP
POWER
MEAS
STOP
REVERSE
SPEED
COLD
Turn the switch on behind the machine.
If it is not the first use,
Hold the
POWER
button.
Hot Lamination
Press the
HOT
button.
Initial setting is 212°F and speed 6.
The machine will start to heat up and the hot icon will flicker.
When the machine reaches the set temperature, it will beep 3 times.
Now you can start to laminate.
Warning-Always insert the sealed side first.
Adjusting Temperature and Speed
You can adjust the speed settings (1~9) if you wish to
laminate faster.
-When the seal of the pouch is not satisfactory,
increase the temperature..
Auto Shut Off
Hold the
POWER
button until Cool is shown on the display.
Once the machine reaches below 149°F the power will automatically shut off.
(Keep the temperature 158°F and speed 2 for “STAND BY” mode.)
Warning
Do not turn off the Power Switch as soon as you are done laminating
to prevent overheating the rollers.
Cold lamination
Press the COLD button.
-The machine will start to cool down. It will beep 3 times and display “READY”
when it is cool enough for cold lamination.
1.
2.
3.
4.
5.
6.
7.
