“PROLAM” OPERATIONAL MANUAL
▶
INSTRODUCTION:
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW
PRO-LAM,
A HEAVY DUTY POUCH LAMINATOR. YOUR
PRO-LAM WAS SPECIALLY DESIGNED WITH THE HIGHEST AVAILABLE TECHNOLOGY AND PREMIUM QUALITY
COMPONENTS TO RENDER YOU A HIGH QUALITY LAMINATION AS WELL AS MANY YEARS OF TROUBLE-FREE
SERVICE.
THE PRO-LAM CAN OPERATE WITH ANY STANDARD LAMINATING POUCH CURRENTLY IN THE MARKET. IT WAS
SPECIALLY DESIGNED TO OPERATE WITH OR WITHOUT A CARR|ER. NOTE: WE ONLY RECOMMEND THE USE
OF CARRIERS WITH INFERIOR QUALITY POUCHES (HIGH ADHESIVE COMPOSITION i.e. 10 MILS (4/6) POUCHES),
AS THEY MAY EXCRETE EXCESSIVE ADHESIVE, WHICH CAN POTENTIALLY DAMAGE THE SYSTEM.
▶
OUTSIDE FEATURES:
IMPORTANT:
WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH THE
FUNCTIONS OF YOUR NEW
PRO-LAM.
YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANY
PERSON CAN ACHIEVE A PROFESSIONAL LAMINATION.
▶
OPERATION:
·
PLACE YOUR NEW PRO-LAM ON TOP OF A WORKING TABLE.
·
PLUG POWER TO A GROUNDED 110V OUTLET (220V FOR CERTAIN COUNTRIES).
·
PRESS THE POWER SWITCH TO THE ON POSTION
(1)
. THE POWER LIGHT
(1)
WILL TURN ON INDICATING
THAT THE PRO-LAM HAS BEEN ACTIVATED.
·
ADJUST THE TEMPERATURE CONTROL KNOB
(3)
, TO THE DESIRED POSTION.
·
THE READY LIGHT
(4)
WILL TURN ON IN APPROXIMATELY 2-3 MINUTES, LETTING YOU KNOW THAT THE
PRO-LAM lS READY TO START LAMINATING.
·
PRESS THE MOTOR SWITCH
(2)
TO THE ON POSITION.
·
INTRODUCE THE DOCUMENT TO BE LAMINATED INTO THE POUCH.
·
INTRODUCE THE POUCH (SEALED SIDE FIRST) INTO THE ENTRANCE
(5)
OF THE PRO-LAM.
*Remarks :
When laminating small
pouches(with short-side less than 3” long) that do not require the use of carriers, insert your pouch with the short-side first, to make sure
it clears the gap between the front & back rollers.
·
REMOVE THE POUCH FROM THE EXIT
(6)
OF THE PRO-LAM.
·
TURN “OFF
”
(1 & 2)
THE PRO-LAM ONCE YOU ARE FINISHED LAMINATING.
