20
2.3 Optional Accessories
2.4 WMS 450
2.5 SR 450 Receiver
• Controls
Front Panel
Refer to fig. 1 on page ii.
The WMS 450 wireless microphone system comprises the SR 450 stationary diversity receiver,
handheld transmitters HT 450/C with C 5 microphone element and HT 450/D with D 5 microphone ele-
ment, and the PT 450 bodypack transmitter. The receiver and transmitters operate in a 30 MHz subband
of each frequency set within the 650 MHz to 865 MHz UHF band. You can select the receiving frequen-
cy from the preprogrammed frequency groups and subchannels of your receiver or set it directly in 25
MHz-increments. Both the handheld and the bodypack transmitter are set to the parameters selected on
the receiver via infrared transmission.
The receiver provides two operating modes:
In
LOCK mode
, all setup functions are electronically locked to prevent parameters from being readjust-
ed unintentionally during a performance or lecture. The "LOCK" label on the display indicates the receiv-
er is in LOCK mode.
SETUP mode
allows you to adjust and save all receiver parameters. In SETUP mode, the "LOCK" label
disappears. An infrared transmission link tunes the handheld or bodypack transmitter to the same fre-
quency as the one you selected on the receiver. You can also set the handheld transmitter audio input
gain on the receiver and transmit the setting to the transmitter via infrared.
You can use the receiver as a standalone unit or install it in a 19" rack using the supplied Rack Mount
Kit.
The display is protected from scratching by a transparent foil. You can peel the foil off at any time.
1 POWER:
Switches power to the unit on or off.
2 LCD display:
The receiver provides a backlit LCD display.
The display indicates all receiver parameters:
a
RF bargraph indicating the field strength of the received signal
b
Alphanumeric display of the current setting
c
Preset/Receiver Name, Frequency Group, Subchannel (shown in Preset and NAME screens only)
d
Audio bargraph indicating the received audio level
e
Parameter to be adjusted, mode
If one or more warning functions are activated (see section 4.1.3), the display will be backlit in red
when a critical condition occurs. As long as all parameters are within their normal ranges, the display
is backlit in green.
3
: These three keys set the various parameters of the receiver.
•
In LOCK mode:
Short push on
or
: scrolls through the Frequency, Preset, and receiver Name screens.
Long push on
: toggles between LOCK and SETUP modes.
•
In SETUP mode only:
Short push on
: Calls up a parameter for adjustment or confirms a selected value.
Short push on
: selects a menu item or increases a parameter value.
Short push on
: selects a menu item or decreases a parameter value.
4 ID:
If you use the receiver within a multichannel system, you can color-code each channel. Remove
the transparent ID cap, replace the black plastic tab with a different-color tab from the optional Color
Coding Kit, and replace the transparent cap.
a
c
d
e
b
AKG WMS 450 V 1.10
2 Description
•
CU 400
charger
•
SRA 2 W, SRA 2
B/W
(shown),
RA 4000 W, RA
4000 B/W
remote
antennas
•
PS 4000
antenna splitter
•
AB 4000
antenna
booster
•
PSU 4000
central power
supply
•
MK PS
anten-
na cable
•
Color Coding
Kit
•
Front panel
mounting kit
for supplied
antennas
•
PPC 1000
Polar Pattern
converter for
HT 450/C
•
W 3004
wind-
screen for
HT 450
•
RMS 4000
remote MUTE
switch for
PT 450
Содержание HT 450
Страница 2: ...ii AKG WMS 450 V 1 10 WMS 450 SR 450 11 a Fig 1 Fig 2 13 11 11 10 14 12 15 Fig 8 Fig 9 ...
Страница 5: ...v AKG WMS 450 V 1 10 A Fig 7 B C Fig 6 A C B D D ...
Страница 6: ...vi AKG WMS 450 V 1 10 Fig 13 Fig 16 Fig 15 Fig 14 Fig 10 Fig 11 1a 1b Fig 17 1a 1b 10cm 10cm ...
Страница 7: ...vii AKG WMS 450 V 1 10 ...