6
3 GN 15/30/50 ES Installation Modules
3.1 Description
3.2 Installation and
Connection
3.3 Switching the
Microphone ON
Important!
3.4 Defeating the
LED Ring and
Activating the
Bass Cut
Fig. 2: GN 15 ES
Refer to fig. 2.
Goosenecks for temporary installation in three different
lengths (GN 15 ES: 26 cm/10 in.; GN 30 ES: 40 cm/15.7 in.;
GN 50 ES: 60 cm/24 in.) with integrated DPA XLR phantom
power adapter, ON/OFF switch, switchable bass cut, and
defeatable LED ring. A PS 3 F-Lock panel mount socket is
included.
Refer to sections 4.1 and 4.2 in the instruction manual of
your Capsule Module.
1. To switch the microphone ON, press the ON/OFF
switch on the Installation Module.
The LED ring near the upper end of the Installation
Module will illuminate.
The microphone will only be open if you pressed the
ON/OFF switch on the Installation Module.
The
microphone will NOT be activated automatically upon
powering up the sound system.
The LED ring will glow
only
as long as the micro-
phone is
open
.
2. To switch the microphone OFF, press the ON/OFF
switch again.
1. Use a screwdriver to lever the pushbutton (1) out of
the case.
2. Unscrew the fixing screw (2) CCW.
3. Pull the circuit board out of the case WITH CAUTION.
4. Refer to sections 4.7.3 and/or 4.8 in the instruction
manual of the Capsule Module.
2
1
