AKG DISCREET ACOUSTICS MODULAR Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 16

AKG DISCREET ACOUSTICS MODULAR Скачать руководство пользователя страница 7

4 Installation and Connections

22

4.3.2. GN 15, GN

30, GN 50 Audio

Connection

Connecting to

bodypack

transmitters:

Fig. 1: Connector pin-

out for connecting to

bodypacks

4.3.3. GN 30 OC

Audio Connection

Note:

For even better vibrational noise rejection, you can

fix the Installation Module to the tabletop with an optional
H 600 + A 608 shock mount (see figs. 14 and 15).

1. Plug the cable of the DPA phantom power adapter

into the female mini XLR connector on the connecting
cable of the Installation Module.

2. Use a shielded cable to connect the DPA phantom

power adapter to a microphone input with phantom
power.

3. If the phantom power on your mixing console is swit-

chable, switch the phantom power on. (Refer to the
instruction manual for your mixing console.)
The Capsule Module and the LED ring (see Section
4.7) will be powered from the phantom supply.

You may also connect the GN 15, GN 30, and GN 50
installation modules to a PT 60, PT 61, PT 80, or PT 81
bodypack transmitter from AKG.
All you need to do is change the wiring of the mini XLR
connector as shown in fig. 1 below:

Pin 1: shield
Pin 2: red wire (in phase)
Pin 3: bridge to pin 2
Blue wire: unused
Black wire: unused

This Installation Module has been designed for 1.5 V to
10 V a-b powering. The unterminated cable provides the
following connections:

•

1

•

•

2 3

Shield

Wire bridge

Red (in phase)

«
...
5
6
7
8
9
...
»

Содержание DISCREET ACOUSTICS MODULAR

















Отзывы:

Нет отзывов