AKG CK41, Руководство пользователя, Страница: 12 / 26

12 Discreet Acoustics Modular PLUS Series
Modules falling into Place
Reference Hanging Module
Theater and onstage miking
Houses of worship
Broadcast studio
The HM1000 M is a reference hanging module compatible with all capsules of the Modular
Plus Series (CK41, CK43 and CK49). It is used to fly microphones from the ceiling to record
music or speech in places of worship or conference rooms, or on theater stages. An
integrated switchable light-ring shows the status of the microphone at a glance. A special
light-ring expander comes with every Modular Plus hanging module to improve the visibility of
the LED ring if necessary.
The HM1000 M provides a 10 m (33 ft) special cable that will not tend to twist, even if the
temperature varies. A spring steel hanging clamp for precise microphone alignment is also
included in the package. The integrated system connector fits all available phantom power
modules of the Modular Plus Series.

Twist-free 10m cable included
to fix and secure the designated mic position

Highly reliable contacts for capsule modules
prevent contact problems and ensure extra-long life

Spring clamp for vertical adjustment
allows quick and hassle-free installation

Integrated switchable LED ring indicator
for full control of the installation status

Ingenious system connector interface
adapter adds flexibility to all mounting modules
Included accessories: Hanging clamp, LED ring expander
Item Number: HM1000 M 3165H00250
HM1000 M Hanging Module
1) Prior to installing the HM1000 M, straighten the cable by carefully pulling it through your
fingers. Make sure not to buckle or twist the cable.
2) Fasten a hook to the ceiling, use an existing hook, or stretch a line across the hall.
3) Pass the cable through the hook or over the line so that it will hang at the desired height.
4) Fix the cable in place with electrician's tape.
ATTENTION
RISK OF DAMAGE!
Do not tie a knot into the cable to hang it on the hook.
5) Hold the cable with one hand and turn the microphone carefully into the desired position.
To activate the bass cut, refer to PAESP M (page 13), PAE5 M (page 14) or PAE M (page 15).
Steadying the microphone
To keep the microphone steady even in a draft,
1) Stretch a suitable length of fishing line horizontally across the room, passing the fishing
line through the eye on the HM1000 M.
2) Fix the fishing line to two opposite walls so as to create just enough downward pull to
steady the microphone laterally.
HM1000 M